Using Multiple Projectors
133
m
Press [Esc] to return to the previous screen.
Adjusting the Lamp's Brightness
When projecting with multiple projectors, you must adjust the brightness
setting for each projector.
Turn on all the projectors and select the Brightness Level setting in each
projector's Extended menu so that all the projectors are as bright as the
darkest lamp on the combined screen.
a
• Even after adjusting the brightness levels, the brightness of each lamp
may not match exactly.
• This function is only available when Power Consumption is set to
Normal.
s ECO > Power Consumption
• This function is disabled in whiteboard mode.
a
Press the [Menu] button, select the Extended menu, and press [Enter].
b
Select Multi-Projection and press [Enter].
c
Select Brightness Level and press [Enter].
To Next Page
Loading...
Need help?
General
