Control Computer Features from a Projected Screen (Computer Interactive Mode)
92
e
Press the [Menu] button, select the Extended menu, and then press
[Enter].
f
Select the USB Type B setting, and then press the [Enter] button.
g
Select one of the following:
• To use computer interactive mode with a computer cable, an HDMI
cable, or over a network, select Easy Interactive Function.
• To use computer interactive mode and USB Display at the same
time, select USB Display/Easy Interactive Function.
a
• When projecting using USB Display, response time may be
slower.
• Using two interactive pens at the same time may cause
interference in some applications. Move the unused interactive
pen away from the projection screen.
• Select the Pen Operation Mode setting in the Easy Interactive
Function setting in the projector's Extended menu according
to the operating system of the connected computer.
s Extended > Easy Interactive Function > Pen Operation
Mode
h
Press the [Menu] button to exit the menus.
i
Make sure you have calibrated the first time you use your projector.
j
Hold an interactive pen close to the projected screen, or touch the
projected screen with your finger.
The icon is displayed on the projected screen.
To Next Page
Loading...
Need help?
General
