Remote Control
Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.30
B
[Computer] button
Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
C
[Video] button
Each time the button is pressed, the image cycles through
the S-Video, Video, and HDMI ports.
D
Numeric buttons
• Enter the Password.
s "Setting Password Protect" p.59
• Use this button to enter numbers in Network settings
from the Configuration menu.
E
[A/V Mute] button
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.51
F
[Freeze] button
Images are paused or unpaused.
s "Freezing the Image (Freeze)" p.51
G
[Auto] button
If pressed while projecting analog RGB signals from
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Display
Position.
H
[Aspect] button
Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image "
p.42
I
[Page] buttons
[Up] [Down]
Changes pages in files such as PowerPoint files when using
the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.54
• When using USB Display
s "Projecting with USB Display" p.32
• When connecting to a network
When projecting images using Slideshow, pressing these
buttons displays the previous/next screen.
Part Names and Functions
14
To Next Page
Loading...
