Lens type Vertical lens shift:
Home position
Side view
Vertical lens shift: Top
Side view
ELPLM10/ELPLM06 0.14 0.15
ELPLM11/ELPLM07 0.10 0.10
ELPLL08/ELPLL07 0.07 0.07
Correction method
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings.
c
Select Curved Surface, and then press the [ ] button.
If the message "If this setting is changed, the image may be
distorted." is displayed, press the [
] button.
d
Select Curved Surface, and then press the [ ] button.
e
Select Correct Shape, and then press the [ ] button.
Adjusting Projected Images
73
To Next Page
Loading...
