Epson EB-G7905UNL Firmware Update Information

Details of Updated Projector Menus (Version 2.10)
16
Previous Settings Menu (Version 1.00)
Top menu Sub menu Items or setting
values
Settings Geometry
Correction
Curved Surface Correct Shape
Horizontal
Linearity
Vertical Linearity
New Settings Menu (Version 2.10)
Top menu Sub menu Items or setting
values
Settings Geometry
Correction
Curved Surface Correct Shape
Horizontal
Linearity
Vertical Linearity
Maintain Aspect
Ratio
To project onto a curved surface while maintaining the aspect ratio, set
Maintain Aspect Ratio to On.
Reset All (Factory Default) Menu
The Reset All (Factory Default) menu is added to the Reset menu.
Previous Reset Menu (Version 1.00)
Top menu Sub menu Items or setting values
Reset Reset Lamp Hours
Top menu Sub menu Items or setting values
Reset All Memories
Reset All Config
New Reset Menu (Version 2.10)
Top menu Sub menu Items or setting values
Reset Reset Lamp Hours
Reset All Memories
Reset All Config
Reset All (Factory Default)
You can use the Reset All (Factory Default) menu to reset all projector's
settings.
However, Date & Time, Lamp Hours, Password Protection items and their
passwords are not reset.
You need to enter a password to perform a reset. The default password is set
to "0000". Change this to your own desired password.
Kelvin in Color Temperature
The color temperature is specified with Kelvin in all color modes.

Epson EB-G7905UNL Specifications

General

Brand	Epson
Model	EB-G7905UNL
Category	Projector
Language	English