Epson EB-L1405U - Switching to the Target Image by Remote Control; Adjusting the Volume

Switching to the Target Image by Remote Control
• Press the button of the input source that you want to project.
The input ports for the buttons are shown below.
Remote control
Input Port
D
Changes to images from a computer connected via the network.
E
For EB-L1505U/EB-L1500U/EB-L1405U only
• Press the [ ] button.
Remote control
Select the input source to be projected, and then press the [ ] button.
Adjusting the Volume
You can adjust the volume using one of the following methods.
Projecting Images
60