Epson EB-L1750U Update Information

Details of Updated Projector Menus (Version 3.00)
18
Refer to these sections for details about projector menu changes.
gg Related Links
• "Camera Function Error Details" p.18
• "Auto Adjusted Setting Items During Screen Matching" p.18
• "Point Correction" p.18
• "Adjustment Level for Color Matching" p.19
• "Enable and Disable Color Calibration" p.19
• "Lens Calibration History" p.19
• "Brightness Level" p.20
Camera Function Error Details
New Error Display (Version 3.00)
When camera function errors occur, the error details are displayed.
Error code Status
0x01 Measurement value error
0x02 Measurement failure
0x03 Switch camera failure
For details on the operating conditions for the camera function, see the
projector's User's Guide.
Auto Adjusted Setting Items During Screen Matching
Blend Curve is added to the auto adjusted setting items when you select
Extended > Multi-Projection > Screen Matching > Start Auto Adjustment.
Previous Setting Items (Version 2.10)
Brightness Settings, Black Level (Color Adjustment only)
New Setting Items (Version 3.00)
Brightness Settings, Black Level (Color Adjustment only), Blend Curve
Point Correction
The following changes are applied to the point correction function.
• You can select the grid numbers for vertical and horizontal point correction
individually.
• You can select up to 33×33 for grid point correction.
• You can select which method is performed for point correction, linear
interpolation or curve interpolation.
Previous Settings Menu (Version 2.10)
Menu Setting values
Point Correction [3x3], [5x5], [9x9], [17x17]
Pattern Color
Reset
New Settings Menu (Version 3.00)
Menu Setting values
Point Correction
Points (Vert.) [3], [5], [9], [17], [33]
Points (Horiz.)
Pattern Color
Interpolation Line, Curve
Reset

Epson EB-L1750U Specifications

General

Brand	Epson
Model	EB-L1750U
Category	Projector
Language	English