Epson EB-L630U - Connecting to an Hdbaset Transmitter; Connecting to External Devices

Projector Connections
34
c
Connect the other end to the streaming media player's USB port (Type-
B).
Connecting to an HDBaseT Transmitter
To send an HDMI or RS-232C signal over a long distance, you can connect
the projector to an optional HDBaseT transmitter using a 100Base-TX
network cable. This is useful when you want to send a signal to or control the
projector from a remote location, such as in a hall or event site, since you can
use a network cable up to 100 m in length. To ensure proper data
transmission, use a Category 5e STP cable or better. However, operation is
not guaranteed for all input/output devices and environments.
a
• To enable communication from the Ethernet and serial ports on the
transmitter, set the Control Communications setting to On in the
projector's Signal I/O menu. Turning on this setting disables the
projector's LAN and RS-232C ports.
s Signal I/O > HDBaseT > Control Communications
• If you connected an Extron XTP transmitter or switcher to the
projector's HDBaseT port, set the Extron XTP setting to On in the
projector's Signal I/O menu.
s Signal I/O > HDBaseT > Extron XTP
• If you want to control the projector when the projector does not
project any images, set the A/V Output setting to Always On in the
projector's Signal I/O menu.
a
Turn off the projector and HDBaseT transmitter.
a
Make sure the projector and HDBaseT transmitter are turned off
when connecting or disconnecting a network cable between the
two devices.
b
Connect one end of the network cable to the HDBaseT port on the
transmitter.
c
Connect the other end to the projector's HDBaseT port.
a
See the documentation that came with the HDBaseT transmitter
for instructions on connecting it to your video device or
computer.
d
Turn on the projector and HDBaseT transmitter.
Connecting to External Devices
Follow the instructions in these sections to connect external devices to the
projector.
gg Related Links
• "Connecting to an External HDMI Monitor" p.35
• "Connecting to a VGA Monitor" p.35
• "Connecting to External Speakers" p.35