Epson EB-L630U - Attaching and Removing the Cable Cover

Attaching and Removing the Cable Cover
38
When suspending the projector from a ceiling, you can attach the cable cover
that came with your projector to hide the attached cables from view
(EB‑L735U/EB‑L730U/EB‑L635SU/EB‑L630SU/EB‑L630U/EB‑L530U).
a
Pass a commercially available cable tie through the cable holder and tie
the cables together.
Caution
Do not bundle the power cord to the other cables. Otherwise, a fire may
occur.
b
Place the cable cover on the projector as shown, guiding the cables
through the notch on the base of the cable cover.
c
Tighten the cable cover screws.
To remove the cover, loosen the cover screws and pull the cover off of
the projector.