Selecting an Image Source
71
C
USB port source
D
Network source (LAN and Screen Mirroring)
• Press the [Home] button on the remote control.
Then select the source you want to use from the screen displayed.
a
• The display order of the input sources changes when the
projector detects an input signal. (The detected input source
appears in the upper left position.)
• You can fix the display order of the input sources using the
Sort Source Thumbnails setting in the projector's Display
menu.
• A check mark appears on the image from the current input
source. You can check a preview of the current input image
for most sources as a thumbnail (other than the USB input
source in Content Playback mode).
• If there are more than nine available input sources, your
desired source may appear on the next page. Select the right
arrow to move to the next page.
To Next Page
Loading...
