Epson EB-L720U - Page 190

Projector Feature Settings - Operation Menu
190
Setting Options Description
A/V Mute Timer On
Off
Turns off the projector automatically if
A/V Mute is enabled and 30 minutes of
inactivity has passed.
Standby Mode Communication
On
Communication
Off
Set to Communication On to allow
monitoring and controlling the projector
over a network when the projector is in
standby mode.
Setting is only displayed in the following
cases:
• A/V Output is set to While Projecting
in the projector's Signal I/O menu.
• USB Power is set to On While
Projecting.
• Auto Power On is set to Off in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
Port Wired LAN
Wireless LAN
Sets the port to use while the Standby
Mode setting is set to Communication
On.
Startup Source Various input
sources available
Select the image source you want to
project when the projector is turned on
in Content Playback mode.
Setting Options Description
Quick Startup 20min.
60min.
90min.
Off
Sets the time period for Quick Startup
mode. The projector enters this mode
when you turn it off. You can start
projecting in approximately 5 seconds by
pressing the power button.
However, it may take longer to become
ready for use in the following situations:
• When projecting from the projector's
USB port
• When projecting from the projector's
HDMI Out port
• When projecting using the Screen
Mirroring features
Setting is only displayed in the following
cases:
• A/V Output is set to While Projecting
in the projector's Signal I/O menu.
• Auto Power On is set to Off in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
USB Power
(EB‑L735U/EB‑L73
0U/EB‑L635SU/EB‑
L630SU/EB‑L630U/
EB‑L530U)
On While
Projecting
Always On
Set to Always On to continue supplying
power to the streaming media player
when the projector is not projecting
images. This lets the streaming media
player start earlier, or perform its
firmware updates automatically over a
network if necessary.
Setting is only displayed in the following
cases:
• A/V Output is set to While Projecting
in the projector's Signal I/O menu.
• Auto Power On is set to Off in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
Indicators On
Off
Set to Off to turn off the indicator lights
on the projector except when an error or
warning occurs.