Epson EB-L720U - Solutions When HDMI Link does not Function

Solutions When HDMI Link does not Function
241
If you cannot operate the connected devices using the HDMI Link features,
try the following solutions:
• Set the HDMI Out Setting setting to Pass Through in the projector's
Multi-Projection menu
(EB‑L735U/EB‑L730U/EB‑L635SU/EB‑L630SU/EB‑L630U/EB‑L530U).
• Make sure the cable meets the HDMI CEC standard.
• Make sure the connected device meets the HDMI CEC standard. See the
documentation supplied with the device for more information.
• Check that all cables required for HDMI Link are securely connected.
• Make sure the connected devices are turned on and in standby status. See
the documentation supplied with the device for more information.
• If you connected a speaker, set it to PCM output.
• If you connect a new device or change the connection, set the CEC function
for the connected device again and restart the device.
• Do not connect 4 or more multi-media players. You can connect up to 3
multi-media players that meet the HDMI CEC standard at the same time.
• If the device does not appear in the Device Connections list, it does not
meet the HDMI CEC standards. Connect a different device.
gg Related Links
• "Multiple Projector Operation Settings - Multi-Projection Menu" p.203