Using Multiple Projectors
121
a
Press the [Menu] button, select the Multi-Projection menu, and press
[Enter].
b
Select Color Matching and press [Enter].
c
Set the Adjustment Level to 8.
d
Select Brightness and adjust the value.
e
Select Red, Green, or Blue and adjust the color tone, if necessary.
f
Go back to the top level menu and select the Operation menu and
press [Enter].
g
Select Light Source Brightness Control and press [Enter].
h
Set the Light Source Mode to Custom.
i
Adjust the Brightness Level.
j
Repeat steps 1 through 5 multiple times, each time selecting to adjust
levels 7 through 2 in the same way.
k
When you are finished, press [Menu].
Scaling an Image
You can project the same image from multiple projectors and use the Scale
feature to crop and combine them into one unified image area.
To Next Page
Loading...
