Changing the Aspect Ratio
Change the aspect ratio
g
when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the aspect ratio when projecting
computer images at full size.
The changing methods and the types of Aspect Mode are as follows.
Changing methods
Procedure
Remote Control
Each time you press the button, the Aspect Mode name is displayed on the
screen and the aspect ratio changes.
If you press the button while the Aspect Mode name is displayed on the
screen, it changes to the next Aspect Mode.
q
The Aspect Mode can also be set using Aspect in the Signal menu
from the Configuration Menu. s p.50
Functions for Enhancing Projection
27
To Next Page
Loading...
Need help?
General
