Epson EB-X10 User Manual

C Loosen the two Lamp fixing screws.
D Take out the old Lamp by pulling the handle.
If the lamp is cracked, replace it with a new lamp, or contact your
local dealer for further advice.
s Epson Projector Contact List
E Install the new Lamp.
Insert the new Lamp along the guide rail in the correct direction so
that it fits in place securely, and tighten the two screws.
Replacing Consumables
77

Epson EB-X10 Specifications

General

Brand	Epson
Model	EB-X10
Category	Projector
Language	English