EasyManuals Logo

Epson EB-X14 User Manual

Epson EB-X14
113 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
You should clean the projector if it becomes dirty or if the quality of
projected images starts to deteriorate.
Attention
Turn off the projector's power before cleaning.
Cleaning the Projector's Surface
Clean the projector's surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.
Cleaning the Lens
Use a commercially available cloth for cleaning glasses to gently wipe the
lens.
Warning
Do not use sprays that contain flammable gas to remove dust and lint from the
lens. The projector may catch fire due to the high internal temperature of the
lamp.
Attention
Do not rub the lens with harsh materials or subject the lens to shocks, as it
can easily become damaged.
Cleaning the Air Filter
Clean the air filter and the air intake vent when the following message is
displayed.
"The projector is overheating. Make sure nothing is blocking the air vent,
and clean or replace the air filter."
Attention
If dust collects on the air filter, it can cause the internal temperature of the
projector to rise, and this can lead to problems with operation and shorten
the optical engine's service life. Clean the air filter immediately when the
message is displayed.
Do not rinse the air filter in water. Do not use detergents or solvents.
Cleaning
89

Table of Contents

Other manuals for Epson EB-X14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-X14 and is the answer not in the manual?

Epson EB-X14 Specifications

General IconGeneral
Native aspect ratio4:3
Projection distance1.1 - 10.8 m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal±30 °
Projector brightness (economic mode)2400 ANSI lumens
FocusManual
Throw ratio1.48 - 1.77:1
Focal length range17 - 20 mm
Lamp typeE-TORL
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
AC (power) inYes
Audio (L/R) in-
Composite video in0
USB connector typeUSB Type-A, USB Type-B
USB 2.0 ports quantity2
S-Video inputs quantity1
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
RMS rated power2 W
Noise level37 dB
Preset modesDynamic, Presentation, sRGB, Vivid photo
Country of originChina
Noise level (economic mode)29 dB
PlacementDesktop
Product typeStandard throw projector
Product colorBlack, White
Cable lock slot typeKensington
Power sourceAC
AC input voltage220 - 240 V
Power consumption (standby)0.47 W
Power consumption (typical)270 W
Pallet width800 mm
Pallet height2204 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth228 mm
Width295 mm
Height77 mm
Weight2300 g
Package depth360 mm
Package width335 mm
Package height158 mm
Package weight3964 g

Related product manuals