Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
• Correcting automatically (Auto V-Keystone) (EB-X14G/EB-W02/EB-X02/
EB-S02 only)
Automatically corrects vertical keystone distortion.
• Correcting manually (V-Keystone) (EB-W02/EB-X02/EB-S02/EB-W01/
EB-S01 only)
Manually corrects vertical keystone distortion.
• Correcting manually (H/V-Keystone) (EB-X14G only)
Manually correct distortion in the horizontal and vertical directions
independently.
• Correcting manually (Quick Corner) (EB-X14G only)
Manually correct the four corners independently.
a
When you correct keystone distortion, the projected image may be
reduced.
Correcting automatically
Auto V-Keystone (EB-X14G/EB-W02/EB-X02/EB-S02 only)
When the projector detects any movement, for example when it is installed,
moved, or tilted, it automatically corrects vertical keystone distortion. This
function is called Auto V-Keystone.
When the projector remains still for about two seconds after it detects
movement, it displays a screen for adjustment and then automatically
corrects the projected image.
You can use Auto V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx. 30˚ up and down
Adjusting Projected Images
32
To Next Page
Loading...
Need help?
General
