Epson EB-X400 User Manual

Maintaining the Projector
You may need to clean the projector's lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer.
Warning
Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous
electrical voltages in the projector can injure you severely.
gg Related Links
• "Cleaning the Lens" p.125
• "Cleaning the Projector Case" p.126
• "Air Filter and Vent Maintenance" p.127
• "Projector Lamp Maintenance" p.130
• "Replacing the Remote Control Batteries" p.134

Epson EB-X400 Specifications

General

Resolution	XGA (1024 x 768)
Lamp Life (Eco Mode)	12, 000 hours
Weight	2.5 kg
Projection Technology	3LCD
Projection Size	30 - 300 inches
Contrast Ratio	15000:1
Lamp Life (Normal)	5000 hours
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Interfaces	HDMI, VGA, USB
Throw Ratio	1.48 - 1.77:1