Epson EB-X400 User Manual

Replacing the Remote Control Batteries
134
The remote control uses two AA manganese or alkaline batteries. Replace the
batteries as soon as they run out.
Attention
Make sure you read the Safety Instructions before handling the batteries.
a
Remove the battery cover as shown.
b
Remove the old batteries.
c
Insert the batteries with the + and – ends facing as shown.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the batteries are inserted the correct way. If the batteries are not used
correctly, they could explode or leak causing a fire, injury, or damage to the
product.
d
Replace the battery cover and press it down until it clicks into place.

Epson EB-X400 Specifications

General

Resolution	XGA (1024 x 768)
Lamp Life (Eco Mode)	12, 000 hours
Weight	2.5 kg
Projection Technology	3LCD
Projection Size	30 - 300 inches
Contrast Ratio	15000:1
Lamp Life (Normal)	5000 hours
Keystone Correction	Vertical ±30 degrees, Horizontal ±30 degrees
Interfaces	HDMI, VGA, USB
Throw Ratio	1.48 - 1.77:1