Epson EB-X7 User Manual

When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
q
The following screen showing the status of image signals is
displayed when only the image that the projector is currently
displaying is available, or when no image signal can be found. You
can select the input port where the equipment you want to use is
connected. If no operation is performed after about 10 seconds, the
screen closes.
Example: EB-W8/X8
Switch to the target image by Remote Control
You can change directly to the target image by pressing the following
buttons on the Remote Control.
Remote Control
A
Changes to images from the Computer input port.
B
Each time the button is pressed, the image cycles through Video, S-Video,
and HDMI (EB-W8/X8 only) input ports.
C
Each time the button is pressed, the image changes between USB Display
and Slideshow (EB-W8/X8 only).
Changing the Projected Image
23

Epson EB-X7 Specifications

General

Brand	Epson
Model	EB-X7
Category	Projector
Language	English