Image Menu
Items that can be set vary depending on the image signal and Source currently being projected as shown in the following screen shots. Setting details
are saved for each image signal.
Depending on the model used, some image signals and sources are not supported.
s p.22
Analog RGB/Digital RGB/RGB Video/
USB Display/USB
Component Video
g
/Composite video
g
/
S-Video
g
Sub Menu Function
Color Mode
You can select the quality of the image to suit your surroundings.s p.24
Brightness
You can adjust the image Brightness.
Contrast
g
You can adjust the difference between light and shade in the images.
Color Saturation
You can adjust the Color Saturation for the images.
Tint
(Adjustment is only possible when NTSC signals are being input if you use composite video/S-Video.)
You can adjust the image Tint.
Sharpness
You can adjust the image sharpness.
Color Temp.
(This cannot be set when Image - Color Mode is set to
sRGB
g
.) You can adjust the overall tint of the image. When High is selected the image
becomes tinged with blue, when Low is selected the image becomes tinged with red.
Color Adjustment
(This item cannot be selected if
sRGB
g
is selected as the Color Mode from the Image menu.)
Red, Green, Blue: You can adjust the saturation of each color individually.
Auto Iris
(This item can be selected only if Dynamic or Theatre is selected as the Color Mode from the Image menu.)
Set whether or not (On/Off) to adjust to the optimum light status for images being projected.s p.25
List of Functions
49
To Next Page
Loading...
Need help?
General
