45
Top Menu Sub-menu
Web Control
Setting Availability
ESC/VP21 Public Commands
Command Setting Value/Response Value
Info
Status Info
(Displays the status
monitor content)
System
(Web Control only)
-
On-ScreenDisplay
Shutter
AirTemp
Lamp1 Type
Lamp2 Type
Lamp1 Status
Lamp2 Status
Lamp Select
Projector Info
Source SOURCE? See "Switch source" for the response
values.
Input Signal
-
Resolution
RESOL? 00: Auto
01 to 02, 08 to 2D: Manual
A0: Customized 1
A1: Customized 2
F0: Wide
F1: Normal
INIT (settings only)
Video Signal
-
Refresh Rate
Sync Info
Status
Serial Number
Event ID
HDBaseT Signal
Quality
×
Lamp Info Lamp Hours
LAMP? LAMP = x1 x2
x1: Lamp 1 Lighting Time
x2: Lamp 2 Lighting Time
Lamp Status
-
Version
* After the command is executed, approximately 120 seconds after the command is executed, commands for Lamp Select are disabled.
Top Menu Sub-menu
Web Control
Setting Availability
ESC/VP21 Public Commands
Command Setting Value/Response Value
Reset Reset All
INITALL -
Reset Memory
-
To Next Page
Loading...
