6
Product name
EB-Z11000W
EB-Z9900W EB-Z9800W
Lamp replacement
cycle
Standard lamp
(Power Consumption:
Normal/ECO)
Approx. 1900 hours/
Approx. 3900 hours
Approx. 2400 hours/
Approx. 3900 hours
Approx. 2900 hours/
Approx. 3900 hours
Lamp for portrait use Approx. 900 hours
Operating temperature
*6
0 to +50°C No condensation (Altitude 0 to 1,499 m)
0 to +45°C No condensation (Altitude 1,500 to 3,048 m)
Power supply
AC 100 - 240V ± 10%,
50/60Hz,
11.2 - 4.9 A
AC 100 - 240V ± 10%,
50/60Hz,
10.0 - 4.4 A
AC 100 - 240V ± 10%,
50/60Hz,
8.5 - 3.8 A
Power
consumption
100 - 120 V
Area
Operating (2
lamps, Power
Consumption:
Normal/ECO)
1120 W (Normal)
,
821 W (ECO)
995 W (Normal),
821 W (ECO)
844 W (Normal),
748 W (ECO)
Standing by 2.7 W (Communication On), 0.26 W (Communication O ) (for 100 V)
220 - 240 V
Area
Operating (2
lamps, Power
Consumption:
Normal/ECO)
1060 W (Normal)
,
788 W (ECO)
948 W (Normal),
788 W (ECO)
809 W (Normal),
721 W (ECO)
Standing by 2.9 W (Communication On), 0.37 W (Communication O ) (for 220 V)
Noise level
*2
(Power Consumption: Normal/ECO)
40 dB/35 dB 38 dB/35 dB 37 dB/35 dB
Dissipation BTU
(max.)
100 - 120 V Area 3808 BTU/h 3383 BTU/h 2870 BTU/h
220 - 240 V Area 3604 BTU/h 3223 BTU/h 2751 BTU/h
Air ow (max.) 165.9 CFM
Image input ports
Mini D-Sub15-pin x1, 5BNC x1, HDMI x1, Mini DIN 4-pin x1, Composite
video (1 BNC) x1, DVI-D 24 pin x1, HDBaseT x1
Image output port Mini D-Sub15-pin x1
Network
RJ45 (100BASE-TX/10BASE-T) x1
USB connector (A type) x1 (for wireless LAN unit
*7
corresponding to
IEEE802.11b/g/n)
Control ports
RJ45 x1, Mini D-Sub9-pin x1 (RS-232C), stereo mini x1 (for wired remote
control), HDBaseT x1
Function
Others
Geometric Correction function, Edge Blending, Portrait Projection
*8
, 2 lamps
type, Lamp Relay, Schedule, Shutter, Split Screen, Password Protection,
Memory function, Direct Power On, Direct Shutdown, Network Projection
function
Products supplied
Power cord (3 m), Computer cable (1.8 m), Remote control (with 2 AA size
batteries), Cable clamp for power cord, Cable clamp for HDMI cable, User
manuals
*1 The specications are when a standard zoom lens ELPLS04 is attached.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 Only for input signals from the Computer input port.
*4 Only VESA CVT-RB (Reduced Blanking) signals are supported.
*5 The lens cannot be shifted to the maximum in all four directions. The Rear projection wide lens ELPLR04 does not support
lens shift.