Epson EcoTank ET-2726 - Ink Bottle Handling Precautions

c
Important:
❏ Epson warranty does not cover damage caused by inks other than those specied, including any genuine Epson
ink not designed for this printer or any third party ink.
❏ Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and
under certain circumstances, may cause erratic printer behavior.
Note:
❏ Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.
❏ Although the ink bottles may contain recycled materials, this does not aect printer function or performance.
❏ Specications and appearance of the ink bottle are subject to change without prior notice for improvement.
For Europe
Product BK: Black C: Cyan M: Magenta Y: Yellow
ET-2720 Series 104 104 104 104
L3160 Series 103 103 103 103
Note:
Visit the following website for information on Epson's ink bottle yields.
http://www.epson.eu/pageyield
For Australia and New Zealand
BK: Black C: Cyan M: Magenta Y: Yellow
522 522 522 522
Related Information
& “Technical Support Web Site” on page 159
Ink Bottle Handling Precautions
Read the following instructions before relling ink.
Storing precautions for ink
❏ Keep the ink bottles out of direct sunlight.
❏ Do not store the ink bottles in high or freezing temperatures.
❏ Aer bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
❏ Epson recommends using the ink bottle before the date printed on the package.
User's Guide
Relling Ink
98