B&W:
Copies the original in black and white (monochrome).
Color:
Copies the original in color.
(2-Sided):
❏ 1→1-Sided
Copies one side of an original onto a single side of paper.
❏ 1→2-Sided
Copies two single-sided originals onto both sides of a single sheet of paper. Select the orientation
of your original and the binding position of the paper.
(Density):
Increase the level of density by using + when the copying results are faint. Decrease the level of
density by using - when ink smears.
(Reduce/Enlarge):
Congures the magnication ratio of the enlargement or reduction. Select the value and specify the
magnication
used to enlarge or reduce the original within a range of 25 to 400%.
❏ Actual Size
Copies at 100 % magnication.
❏ Auto Fit Page
Detects the scan area and automatically enlarges or reduces the original to t to the paper size you
selected. When there are white margins around the original, the white margins from the corner
mark of the scanner glass are detected as the scan area, but the margins at the opposite side may be
cropped.
❏ 10x15cm→A4, A4→10x15cm, and so on
Automatically enlarges or reduces the original to
t
to a
specic
paper size.
(Paper Setting):
Select the paper source that you want to use. Select to select the paper size and the paper type you
loaded.
Copying
>
Copying Originals
>
Menu Options for Copying
101