Epson EcoTank L8160 Series - It is Time to Replace the Maintenance Box

11.
Close the scanner unit.
Note:
e scanner unit is designed to close slowly and resist a little as a precaution against catching ngers. Continue to close
even if you feel some resistance.
12.
Follow the on-screen instructions to set the ink level of the color of the ink you relled.
c
Important:
Even if you do not rell ink up to the upper line on the ink tank, you can continue using the printer. To keep your
printer operating at its best, however, ll ink tank up to the upper line and reset the ink level immediately.
Related Information
& “Ink Bottle Codes” on page 256
& “Ink Bottle Handling Precautions” on page 202
& “Cleaning Spilled ink” on page 145
It is Time to Replace the Maintenance Box
Maintenance Box Handling Precautions
Read the following instructions before replacing the maintenance box.
❏ Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
❏ Do not replace the maintenance box during printing; otherwise, ink may leak.
❏ Do not remove the maintenance box or open its cover except when replacing the maintenance box; otherwise
ink may leak.
❏ Do not reuse a maintenance box which has been removed and le detached for a long period. Ink inside the box
will have solidied and no more ink can be absorbed.
❏ Do not tilt the used maintenance box until aer it is sealed in the plastic bag; otherwise ink may leak.
❏ Do not store the maintenance box in high or freezing temperatures.
Solving Problems > It is Time to Replace the Maintenance Box > Maintenance Box Handling Precautions
207