Epson EcoTank L8160 Series - Page 266

LCD Brightness:
Adjust the brightness of the LCD screen.
Auto Power On:
Select On to turn on the printer automatically when it receives a print or scan job over a USB-
connection or a network connection. To start printing, you need to slide out the output tray. Also,
enabling Auto Power On increases power consumption slightly in standby status when compared to
turning the printer o completely.
Use the Power O Timer setting if you want the printer to automatically turn o when the print or
scan job is nished and a set time period has passed with no operations performed. is is useful
when printing from a remote location such as over the Internet.
Power
O
Timer:
Your product may have this feature or the Power O Settings feature depending on the location of
purchase.
Select this setting to turn the printer
o
automatically when it is not used for a
specied
period of
time. You can adjust the time before power management is applied. Any increase will aect the
product’s energy eciency. Please consider the environment before making any change.
Power O Settings:
Your product may have this feature or the Power O Timer feature depending on the location of
purchase.
❏ Power O If Inactive
Select this setting to turn the printer o automatically if it is not used for a specied period of
time. Any increase will
aect
the product’s energy
eciency.
Please consider the environment
before making any change.
❏ Power O If Disconnected
Select this setting to turn the printer o aer 30 minutes when all ports including the USB port are
disconnected. is feature may not be available depending on your region.
Sleep Timer:
Adjust the time period to enter a sleep mode (energy saving mode) when the printer has not
performed any operations.
e
LCD screen turns black when the setting time passes.
Language:
Select the language used on the LCD screen.
Background Color:
Change the background color of the LCD screen.
Output Tray LED Brightness:
Adjust the brightness of the output tray LED during printing. Select O to turn o the output tray
LED during printing.
Clear All Settings:
Resets the Basic Settings to their defaults.
Product Information > Settings Menu List > Basic Settings
266