What to do if Epson EH-TW6000W Home Theater System shows a high temp warning?
If you receive a high temperature warning on your Epson Home Theater System, you can continue projecting. If the temperature rises too high again, projection will stop automatically. Ensure there is at least 20 cm between the wall and the projector's exhaust vent if it's installed next to a wall. Also, clean the air filter if it's clogged.
What to do if Epson EH-TW6000W shows internal error?
If your Epson Home Theater System displays an internal error, remove the power plug from the electrical outlet and contact your local dealer or the nearest Epson repair center.
Explains how the guides for the projector are organized.
Explains safety indications and general information notations.
Lists items supplied with the projector.
Highlights key features like 3D, Color Modes, and Absolute Color Adjustment.
Details WirelessHD standards and setup for the EH-TW6000W model.
Describes additional features like remote backlight and audio playback.
Details the components located on the front and top of the projector.
Explains the buttons and indicators on the projector's control panel.
Identifies the ports and connectors on the rear of the projector.
Describes the base of the projector, including mounting points.
Illustrates the buttons and functions of the remote control.
Provides visual diagrams and dimensions of the projector.
General guidance on setting up the projector.
Discusses different ways to project images and related warnings.
Explains how to adjust projection size and provides distance tables.
Provides instructions for connecting various video equipment.
Guides for connecting a computer using various cable types.
Instructions for setting up and connecting WirelessHD devices.
Instructions for installing batteries and understanding operating range.
Steps for turning the projector on and off.
Troubleshooting steps when no image is displayed.
Guides on displaying test patterns and adjusting focus.
Instructions for adjusting projector tilt using the front foot.
Methods for correcting keystone distortion, auto and manual.
How to adjust the projector's volume.
Temporarily mutes the image and sound.
Explains how to select projection quality and color modes.
How to change aspect ratio to match projection screen.
Guides on adjusting hue, saturation, and brightness.
Explains methods for adjusting gamma for color differences.
Adjusts dark (Offset) and bright (Gain) areas for R, G, B.
Adjusts the overall tint of the image for color balance.
Adjusts skin tone for red or green balance.
Explains how to adjust sharpness and line enhancement.
Automatically adjusts luminance based on image brightness.
Guides on saving and loading image quality settings.
Instructions for loading saved image quality settings.
Procedures for deleting saved image quality settings.
How to rename saved image quality settings.
Guides on watching 3D content and using 3D glasses.
Steps for connecting a 3D device and projecting 3D content.
Defines the optimal viewing area and range for 3D projection.
Important safety warnings for viewing 3D images.
Precautions for handling and wearing 3D glasses to avoid injury.
Advice on correct wearing of 3D glasses and potential side effects.
Advises taking breaks during 3D viewing to prevent eye fatigue.
Safety guidelines for viewing 3D images, including environment and distance.
Advises against 3D use for those with light sensitivity or heart conditions.
Specifies the minimum age and supervision for 3D viewing.
Warnings about using specific battery types and handling them safely.
Guides on projecting two images simultaneously using split screen.
Explains split screen projection and input source combinations.
Steps to start and exit split screen display mode.
How to adjust screen size, source, and audio for split screen.
Explains HDMI Link functionality for linked operations.
How to check devices available for HDMI Link control.
Instructions for playing image files from USB devices.
How to set file display order and slideshow behavior.
Guides on installing and connecting the WirelessHD transmitter.
Steps to re-establish connection with the WirelessHD Transmitter.
Overview of functions available in the WirelessHD settings menu.
Illustrates the communication range for WirelessHD.
Explains how to navigate and use the projector's configuration menu.
Guides on using buttons to select menu items and adjust settings.
Details functions, settings, and explanations for the Image menu.
Details settings related to 3D display, format, and aspect ratio.
Covers settings like 2-2 Pull-down, Noise Reduction, and Setup Level.
Explains settings like EPSON Super White, Overscan, and HDMI Video Range.
Covers Keystone, Audio, and HDMI Link settings.
Details WirelessHD functions like device connection and reception.
Explains Child Lock and Control Panel Lock functions.
How to set projection mode (Front, Ceiling, Rear).
Assigning functions to the User button for quick access.
Starts split screen display and its related settings.
Options for menu position, color, messages, and startup screen.
Configuration for video and component signal types.
Guides on loading, saving, erasing, and renaming memories.
Displays projector information like lamp hours and serial number.
Options for resetting all settings, memory, or lamp hours.
Settings for screen size, source, and audio in split screen mode.
Guides for troubleshooting projector issues.
Explains projector status based on indicator lights and flashing.
Lists error indicators and their corresponding remedies.
Explains indicator lights during normal projector operation.
Guides for troubleshooting when indicators are not helpful.
Troubleshooting steps for image display issues.
Steps to resolve issues when no image is projected.
Troubleshoots issues with moving images from computers.
How to fix issues when "Not Supported" message appears.
Steps to resolve "No Signal" errors.
Guides for adjusting focus and lens cover.
How to fix interference or distortion in projected images.
Addresses issues with image size or missing parts.
Steps to correct color issues and adjust settings.
Troubleshoots issues with images appearing too dark.
How to resolve automatic projection stops.
Troubleshooting steps for when the projector does not turn on.
Guides for when the remote control is unresponsive.
Troubleshooting steps for incorrect 3D projection.
Guides for when HDMI Link does not function.
Troubleshooting steps for projecting WirelessHD images.
Troubleshooting steps when slideshow does not start.
Guides on cleaning projector components.
Steps for cleaning the projector's air filter.
Instructions for cleaning the projector's exterior surface.
How to clean the projector lens gently.
How to clean the lenses of 3D glasses.
Information on when to replace consumables.
When to replace the air filter.
Information on lamp lifespan and replacement messages.
Guides on replacing air filters.
Detailed steps for safely replacing the projector lamp.
How to reset the lamp hour counter after replacement.
Lists available optional accessories and consumables for purchase.
Lists supported resolutions for different video signal types.
Supported resolutions and refresh rates for Component Video.
Supported resolutions and refresh rates for Composite Video.
Supported resolutions and refresh rates for Computer Signals.
Supported resolutions and refresh rates for HDMI inputs.
Supported 3D signal formats, resolutions, and refresh rates.
Supported resolutions and refresh rates for WirelessHD input.
Provides technical specifications for the projector.
Warning about tilting the projector beyond a certain angle.
Details the RS-232C connector shape and pin assignments.
States compliance with FCC regulations for Class B digital devices.
Explains FCC compliance and measures to correct interference.
Contains copyright, liability, and usage restrictions.
Advises on limitations for high-reliability/safety applications.
General| Matrix size | 0.61 \ |
|---|---|
| Projection distance | 2.95 - 4.8 m |
| Projection technology | LCD |
| Contrast ratio (typical) | - |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | 1080p (1920x1080) |
| Keystone correction, horizontal | ± 30 ° |
| Audio input | 2 |
| RS-232 ports | 1 |
| Connectivity technology | Wired |
| Focal length range | 18.2 - 29.2 mm |
| Aperture range (F-F) | 1.51 - 1.99 |
| Lamp type | UHE |
| Lamp power | 230 W |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| DVI port | No |
| AC (power) in | Yes |
| USB connector type | USB Type-A |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| S-Video inputs quantity | 0 |
| Supported video modes | 1080p |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| RMS rated power | 20 W |
| Product color | White |
| Market positioning | Home cinema |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| Voltage tolerance | 10 % |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.35 W |
| Power consumption (typical) | 274 W |
| Noise level | - dB |
| Noise level (economic mode) | 24 dB |
Weight and Dimensions| Depth | 365 mm |
|---|---|
| Width | 420 mm |
| Height | 137.3 mm |
| Weight | 6000 g |
To Next Page
