What to do if Epson Home Theater System shows a high temp warning?
You can continue projecting. If the temperature rises too high again, projection stops automatically. Ensure there is at least 20 cm between the wall and the projector's exhaust vent if installed next to a wall. Clean the air filter.
Covers projector setup, alignment, and placement.
Details how to connect various external devices.
Procedures for powering the projector on and off.
Covers focus, zoom, tilt, and lens shift.
Choosing optimal image quality presets.
Fine-tuning color parameters like Hue, Saturation, Brightness.
Advanced image tuning options like sharpness.
Saving and loading image settings.
Guides on using 3D features and glasses.
WirelessHD setup and operation.
Using the Picture-in-Picture feature.
Explains synchronized operation with AV devices.
Details configuration options for HDMI Link.
Guide to resolving common projector issues.
Troubleshooting steps when indicators are unclear.
General| Projection System | 3LCD |
|---|---|
| Resolution | 1920 x 1080 |
| Native Aspect Ratio | 16:9 |
| Throw Ratio | 1.32 - 2.15:1 |
| LCD Panel | 0.61 inch |
| Contrast Ratio | 70, 000:1 |
| Brightness | 2, 500 lumens |
| Lamp Life | 5, 000 hours (Normal) |
| Zoom Ratio | 1.6x |
| Lens Shift | Vertical: ±60%, Horizontal: ±24% |
| Wireless | Yes |
| Input Ports | HDMI x 2, USB, VGA |
| Output Ports | Audio Out |
| Lamp Type | UHE |
To Next Page
