Epson EH-TW6600W - Switching the Image Source

To Next Page

To Previous Page

Useful Functions

Switching the image source

You can switch the image source for the AV device connected to the WirelessHD Transmitter. When switching,

each input source is displayed on one screen as a preview. This allows you to switch easily between image

sources even when two or more devices are connected using HDMI.

The projector uses Insta Prevue Technology from Silicon Image, Inc.

Main Page

Organization of the Guide and Notations in the Guide2
Using each Guide2
Notations Used in this Guide3
- Safety Indications3
- General Information Indications3
- About the Use of "This Product" or "This Projector3
- Table of Contents4
Introduction7
Part Names and Functions7
- Front/Top7
- Control Panel8
- Remote Control9
- Rear11
- Base12
Appearance13
Preparing14
Installing14
- Projected Image and Position of Projector14
  - Installing in Parallel with the Screen14
  - Installing the Projector Horizontally by Adjusting the Height of Either Side14
- Various Setting Methods15
  - Placing on a Table and Projecting15
  - Suspending from the Ceiling and Projecting16
- Projection Distance and Lens Shift Maximum Values16
Connecting a Device19
- Connecting Video Equipment19
- Connecting a Computer20
- Connecting External Devices20
- Attaching the Wireless LAN Unit23
- Removing the Terminal Cover23
Preparing the Remote Control24
- Installing the Remote Control Batteries24
- Remote Control Operating Range24
  - Operating Range (Left to Right)24
  - Operating Range (Top to Bottom)24
Basic Operations25
Starting and Ending Projection25
- Turning on the Projector and Projecting25
- If the Target Image Is Not Projected26
- Turning off26
Adjusting the Projected Screen28
- Displaying the Test Pattern28
- Adjusting the Focus28
- Adjusting the Projection Size (Zoom Adjustment)28
- Adjusting the Projector's Tilt29
- Adjusting the Position of the Projected Image (Lens Shift)29
  - Making Adjustments Using the Lens Shift Dial29
- Correcting Keystone Distortion (H/V-Keystone)31
- Adjusting the Volume32
- Hiding the Image and Muting the Audio Temporarily32
Adjusting the Image33
- Selecting the Projection Quality (Color Mode)33
- Switching the Screen between Full and Zoom (Aspect)34
Absolute Color Adjustments36
- Adjusting Hue, Saturation, and Brightness36
- Adjusting the Gamma36
  - Select and Adjust the Correction Value37
  - Adjust Using the Gamma Adjustment Graph37
- Adjusting the RGB (Offset/Gain)37
- Color Temp38
- Skin Tone38
Detailed Image Adjustments39
- Adjusting the Sharpness39
- Setting Auto Iris40
- Super-Resolution and Detail Enhancement Functions40
- Panel Alignment41
- Image Processing42
Viewing the Image at the Saved Image Quality (Memory Function)44
- Saving Function44
- Saving a Memory44
- Loading a Memory45
- Deleting a Saved Memory45
- Renaming a Memory45
Useful Functions47
Enjoying 3D Images47
- Setting 3D Images47
- Using 3D Glasses48
- Range for Viewing 3D Images50
- Warnings Regarding Viewing 3D Images51
- Converting 2D Images to 3D and Viewing53
Connecting with Wirelesshd55
TW6600W Only)55
- Installing the Wirelesshd Transmitter55
- Projecting Images60
- Wirelesshd Settings Menu61
- Wirelesshd Transmission Range62
- Operating the Remote Control63
- Remote Control Operating Range64
- Switching the Input and Output64
  - Switching the Target Image64
  - Switching the Image Source66
- Displaying as a Sub-Screen68
Using the HDMI Link Function69
- HDMI Link Function69
- HDMI Link Settings69
- Device Connections70
Playing Back Image Data (Slideshow)71
- Compatible Data71
- Playing a Slideshow71
- Display Settings for Image Files and Slideshow Operation Settings72
Projecting Two Different Images Using73
Picture in Picture73
- Types of Screen that Can be Displayed Simultaneously73
- Projecting on a Picture in Picture73
  - Starting and Exiting Picture in Picture73
  - Changing the Picture in Picture Settings74
Configuration Menu75
Configuration Menu Functions75
- Configuration Menu Operations75
- Configuration Menu Table76
Troubleshooting90
Problem Solving90
- Reading the Indicators90
  - Indicator Status During an Error/Warning90
  - Indicator Status During Normal Operation92
- When the Indicators Provide no Help93
- Event ID102
Maintenance103
- Cleaning the Parts103
- Replacement Periods for Consumables105
  - Air Filter Replacement Period105
  - Lamp Replacement Period105
- Replacing Consumables106
Appendix110
Optional Accessories and Consumables110
- Optional Items110
Supported Resolutions111
- Component Video111
- Composite Video111
- Computer Signals (Analog RGB)111
- HDMI1/HDMI2 Input Signal111
- MHL Input Signal112
- 3D Input Signal HDMI112
- Wirelesshd Input Signal112
- Input Signal MHL (Via a Wirelesshd Transmitter*)113
Specifications114
Glossary118
General Notes120
- General Notice120

Epson EH-TW6600W - Switching the Image Source

Table of Contents

Other manuals for Epson EH-TW6600W

Related product manuals