Adjusting the Image
40
a
Press the button.
c
•
You can make settings from the
Configuration menu.
s Signal -
Super-resolution p.77
•
This cannot be set when a
computer image signal is being
input.
•
This cannot be set when
converting 2D to 3D images.
s Signal - 3D Setup - 2D-to-3D
Conversion p.77
•
When projecting 3D images, this
setting is enabled only for 1080p/
24 Hz/frame packing signals.
b
Use the buttons to
select Super-resolution or Detail
Enhancement, and then use the
buttons to make the adjustments.
For Super-resolution, the higher the value,
the stronger the effect.
For Detail Enhancement, the higher the
value, the more emphatic the texture.
c
Press the button or the
button to exit the menu.
Panel Alignment
Adjusts the pixel color shift of the LCD display.
a
Press the button.
The Configuration menu is displayed.
b
Select Settings - Panel Alignment,
and then press the
button to
confirm the selection.
The Panel Alignment adjustment screen is
displayed.
c
Set Panel Alignment to On.
c
When set to On, the adjusted
value is enabled. When set to Off,
the corrected value returns to the
default value.
d
In Select Color, select the color you
want to adjust.
e
In Pattern Color, select the pattern
(color combination) used for
adjustments.
To Next Page
Loading...
