Epson EH-TW6600W - Configuration Menu Table; Image Menu

Configuration Menu
75
c
For items adjusted using an adjustment bar, such as the brightness level, you can press the
button while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the image or signal in the
Configuration menu. Note that the items displayed for the image, the signal, and other information vary
depending on the image signal being projected.
Image menu
Function Menu/Settings Explanation
Color Mode
Auto, Dynamic, Living Room, Natural, Cinema,
3D Dynamic, 3D Cinema
Select the image quality based on your
surroundings and the image you are pro‐
jecting.
s p.32
Brightness
*1
Adjusts the image brightness.
Contrast
*1
Adjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Color Satura‐
tion
*1*2
Adjusts the color saturation for the im‐
ages.
Tint
*1*2
Adjusts the tint for the images.
Skin Tone
*1
Adjusts the skin tone. The image becomes
greener when set to a positive value and
redder when set to a negative value.
Sharpness
Standard Adjusts the image sharpness.
Advanced
*2
Thin Line Enhance‐
ment, Thick Line En‐
hancement, Vert. Line
Enhancement, Horiz.
Line Enhancement
Adjusts the image sharpness.
Use this to adjust specific areas.
s p.38
Color Temp.
-3 to 6 (10 increments)
*3
Adjusts the tint for the images. The image
is tinted blue for high values, and tinted
red for low values.