Useful Functions
61
Function Explanation
Reset
Resets WirelessHD settings to their default settings.
c
Even when the WirelessHD Transmitter and the projector are connected, 0% is displayed as the
Video Reception when no image signal is being input. Check the communication status using the
Link indicator.
s
p.54
WirelessHD Transmission Range
The following shows the WirelessHD transmission range. Make sure you set up the WirelessHD Transmitter
so that it faces the projector.
Horizontal direction (when WiHD Mode is set to Full) Horizontal direction (when WiHD Mode is set to Dy‐
namic)
Vertical direction (suspended from a ceiling) Vertical direction (suspended from a ceiling)
Vertical direction (placed on a table and so on) Vertical direction (placed on a table and so on)
To Next Page
Loading...
