Useful Functions
63
Remote Control Operating Range
The following shows the operating range between the remote control and the WirelessHD Transmitter.
Operating range (left to right) Operating range (top to bottom)
Switching the Input and Output
With the WirelessHD Transmitter, you can connect and switch between up to five multi-media players (input
devices to be played back) and one monitor device (a monitor device displaying an image, such as a television).
Point the remote control at the WirelessHD Transmitter and press its
button to switch between input
devices and its
button to switch between output devices.
Switching the target image
You can switch between a monitor device, such as a television, connected to the Output port on the
WirelessHD Transmitter and the projector.
To Next Page
Loading...
