Useful Functions
64
a
Turn on the projector or the monitor device, such as a television.
b
Turn on the WirelessHD Transmitter.
The
t
indicator on the WirelessHD Transmitter turns on.
c
Point the remote control at the WirelessHD Transmitter, and then press the button.
Remote control WirelessHD Transmit‐
ter
Depending on the output target, the WiHD indicator on the WirelessHD Transmitter indicates the
following status. The output target projected last time is projected the next time the projector is turned
on.
On: The image is being output to the projector.
Off: The image is being output to the monitor device.
c
You can switch to the other monitor device even when the projector is off.
To Next Page
Loading...
