Basic Operations
28
Adjusting the Projector's Tilt
If the projection screen is tilted (the left and right sides of the projector are at different heights) when the
projector is setup on a table, adjust the front foot so that both sides are level with each other.
Adjusting the Position of the Projected Image (Lens Shift)
If the projector cannot be installed directly in front of the screen, you can adjust the position of the image by
using lens shift.
Making adjustments using the lens shift dial
Turn the vertical and horizontal lens shift dials on the projector to adjust the position of the projected image.
To locate the center of the lens shift range, turn the lens shift dial until you hear it clicks.
To Next Page
Loading...
