Useful Functions
67
Displaying as a Sub-Screen
a
Point the remote control at the
WirelessHD Transmitter, and then
press the
button.
Displays the sub-screen (small screen) for
the connected device.
b
When switching between the sub-
screen and the main screen (large
screen), press and hold down the
button (for 3 seconds) until the
screen changes.
c
To close the sub-screen, press the
button again.
The projected image is switched.
c
•
When the sub-screen is displayed, press
the
button to switch the image
for the sub-screen.
•
When the sub-screen is displayed, press
the
button to change the
position and size (large or small) of the
sub-screen. Each time the
button is pressed, the display position
moves from bottom right, top right, top
left, and bottom left allowing you to
change the size.
To Next Page
Loading...
