Configuration Menu
79
Function Menu/Settings Explanation
Reset
Yes, No
Resets all Signal settings except for Diagonal
Screen Size, 3D Viewing Notice, Aspect, and
Image Processing settings to their default set‐
tings.
*1
This is only displayed when an HDMI1, HDMI2, or WirelessHD image signal is being input. (WirelessHD is for EH-
TW6600W only.)
*2
Settings are saved for each type of input source or signal.
*3
This is only displayed when a PC image signal is being input.
*4
This is only displayed when a Component, PC, or Video image signal is being input.
*5
This is only displayed when a Component, HDMI1, HDMI2, Video, or WirelessHD image signal is being input
(WirelessHD is for EH-TW6600W only).
Settings menu
Function Menu/Settings Explanation
H/V-Keystone
V-Keystone -60 to 60 Performs vertical keystone correc‐
tion.
s p.30
H-Keystone -60 to 60 Performs horizontal keystone cor‐
rection.
s p.30
Audio
Volume Volume 0 to 40 Adjusts the volume.
Inverse Audio On, Off Sets whether or not to invert the left
and right audio output channels.
Set to On when the projector is sus‐
pended from a ceiling and is using
the internal speakers.
HDMI Link
Device Connections - Displays a list of devices connected
from the HDMI1 or HDMI2 ports, or
from WirelessHD
*
.
HDMI Link On, Off Enables or disables the HDMI Link
function.
Audio Out Device Projector, AV System, Wire‐
lessHD Transmitter
*
Sets which device outputs audio
when using the HDMI Link function.
s p.68
Power On Link Off, Bidirectional, Device -> PJ,
PJ -> Device
Sets the link function when the
power is turned on.
Set to power on the projector when
content is played on a connected
device (Bidirectional or Device ->
PJ) or to power on a connected de‐
vice when the projector is turned on
(Bidirectional or PJ -> Device).
Power Off Link On, Off Sets whether or not to power off
connected devices when the pro‐
jector is turned off.
To Next Page
Loading...
