5
EnglishFrançaisDeutschItalianoEspañol
中文
(
简体
)
中文
(
繁体
)
日本語
Caution
•
Do not attach the lens unit when the projector's lens insertion section is facing up.
Dust or dirt could enter the projector.
•
Try not to touch the lens section with your hand or fingers. If fingerprints or oils are
left on the surface of the lens, projection quality deteriorates.
•
Do not touch or pull the connector part or the cable as this could cause a malfunc-
tion.
•
When cleaning this product, do not use a wet cloth or solvents such as alcohol,
benzene, or thinner as this could cause an electric shock or a malfunction.
•
Attach the cover to the lens unit, and place it on its side on a stable surface. Failure
to do so may cause the lens unit to fall causing a malfunction or damage.
To Next Page
Loading...
