Epson CHF 4000 User Manual

INSTALLATION INSTRUCTIONS
Cinema Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
RPA Elite Series Projector Mount
CHF4000/4500
Instructions d´installation
Instrucciones de instalación
Instruções de Instalação

Epson CHF 4000 Specifications

General

Brand	Epson
Model	CHF 4000
Category	Projector Accessories
Language	English

Summary

CEILING INSTALLATION

Threaded Pipe Installation

Instructions for threading the ceiling pipe into the ceiling plate and securing it.

Wood Stud Installation

Pilot Hole Drilling and Mounting

Drilling pilot holes and mounting the projector mount to wood studs.

Concrete Installation

Pilot Hole Drilling and Mounting

Drilling pilot holes and mounting the projector mount to concrete.

Threaded Rod Installation

Securing Mount with Threaded Rods

Mounting the projector mount using threaded rods and jam nuts.

Install Interface Bracket to Projector

Line up and secure interface bracket to projector using screws and washers.

Securing the interface bracket to the projector using M4 screws and washers.

Install Projector With Interface Bracket to Projector Mount

Align and slide projector with bracket onto mount slots.

Attaching the projector with its bracket to the projector mount base.

Securing Projector with Interface Bracket to Projector Mount

Move locking lever to secure projector to mount.

Locking the projector onto the projector mount using the locking lever.

ADJUSTMENTS

YAW Adjustment

Adjusting the projector's horizontal alignment using locking and micro-adjustment screws.

Pitch Adjustment

Adjusting the projector's vertical alignment using locking and micro-adjustment screws.

Roll Adjustment

Adjusting the projector's roll alignment using locking and micro-adjustment screws.

Adjusting the projector's roll alignment using locking and micro-adjustment screws.