,
Pause
“,”, placed anywhere in the dial string, tells the modem to pause
for the number of seconds specified by S-register S8 before pro-
cessing the rest of the dial string.
!
Initiate a Hookflash
“!”, placed anywhere in the dial string, tells the modem to initi-
ate a hookflash, which means to hang up for 0.75 seconds and
then go off-hook again before processing the rest of the dial
string. This modifier allows access to PBX features like call trans-
ferring.
-(
)
Ignored by Modem
These four characters are ignored by the modem, but space may be
included in the dial string for separating area codes and numbers.
Return to Idle State
Causes the modem to enter on-line command mode without initiating
a data modem handshake (used for phone directory auto-dialers).
2 - COMMAND REFERENCE
27
To Next Page
Loading...
