~ 27~
ESC/VP21 Command User’s Guide for Business Projectors
USB connection (600/800/810/811/820, 720/730/520, 73/53/74/54, 735, 8300/9300, 7800/7850, 61/81, 830/835,
740/745/732/737/760/765, 821/828, 7900/7950, S3/S4, 755/750, 62/82/X3, 1715/1710/1705/1700, S5/X5/EX90,260,
G5350/G5150, S6/X6/W6, 1735W/1730W/1725/1720, S7/X7/W7, S8/X8/W8, 1925W/1920W/1915/1910,
W10/X10/S10/EB-W9/X9/S9/X92/S92/EX7200/1260/W10+/EX5200/1220/X10+/EX3200/S10+/S9/VS200,
1760W/EB-1770W/1775W/750, S02/S12/X12/W12/X14)
・ For 600/800/810/811/820, 74/54, select USB at advanced setting of the Menu.
・ For 720/730/520, 73/53, 740/745, 732/737, S3/S4/X3, 760/765, 1715/1710/1705/1700, S5/X5, 260, select Link 21L
at Advanced Setting of the Menu.
・ For 8300/8350/9300, select USB at Advanced2 setting of the Menu.
・ For 61/81, 830/835/821, select USB at Extended setting of the Menu.
・ For 1735W/1730W/1725/1720, S6/X6/W6, S7/X7/W7, S8/X8/W8, S9/X9/W9, S10/X10/W10 and
1760W/EB-1770W/1775W/750 select Wireless Mouse and select Link 21L at Extended Setting of the Menu.
・ EPSON USB COM Driver has to be installed in your computer to use USB for communication. A COM port is added
to your computer, when the projector and your computer is connected by a USB cable. The added COM is listed at
PORT (COM/LPT) in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).
600/800/810/811/820/720/730/520/73/53/74/54/735
7800/7850/8300/9300/61/81/830/835/740/745/732/737
821/828/7900/7950//S3/765/760/755/750/62/82/X3(76)
S4/1715/1710/1705/1700/S5/X5/EX90/260/S6/X6/W6
1735W/1730W/1725/1720/S7/X7/W7/S8/X8/W8
W10/10/S10/EB-W9/X9/S9/X92/S92/EX7200/1260
W10+/EX5200/1220/X10+/EX3200/S10+/S9/VS200
1760W/1770W/1775W/1750,
D283/D293/D6150/D6155W/D6250,
1860/1870/1880/1840W/1850W,
W01/S02/X02/W02/S11/X11/S12/X12/W12/X14
420/425W/435W430
To Next Page
Loading...
Need help?
General
