~ 7~
ESC/VP21 Command User’s Guide for Business Projectors
6. Error Status
A projector returns the error status when a projector receives "ERR?" command.
The following projectors can return the error status while the projectors become
the error status after cooling down.
EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/
EB-G5000/G5100/G5150/G5200W/G5300/G5350
And later models.
[The other models except the above models]
The models except the above models can return the error status while the projectors
The following table shows the return codes and the meaning of error status.
00 :There is no error or the error is recovered
03 : Lamp failure at power on
04 : High internal temperature error
07 : Open Lamp cover door error
09 : Electric dual-layered capacitor is disconnected
0D : Air filter air flow sensor error
0E : Power supply unit error (Ballast)
10 : Cooling system error (peltiert element)
11 : Cooling system error (Pump)
13 : Power supply unit error (Disagreement of Ballast)
14 : Exhaust shutter error
15 : Obstacle detection error
16 : IF board discernment error
To Next Page
Loading...
Need help?
General
