~ 26~
ESC/VP21 Command User’s Guide for Business Projectors
9. Appendix
9.1. Communication specification
A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by
sending commands to the projector.
Serial connection (600/800/810/811/820, 30/52, 73/53/74/54, 8300/9300, 7800/7850, S1/S1H, 61/81, 830/835/821,
828/7900/7950, 62/82,6100/6000, 1815/1810/1825, 83/822/83+/822+, 260/280, 6110/6010, 400W/410W,
G5350/G5300/G5200W/G5150/G5100/G5000, 84/85/824/825/826W, Z800WU/Z8050W, 1830/1900/1910/1915/
1920W/1925W, 440W/450W/450We/450Wi/460/460e/460i, 84H/84He/84L/85H/85HV/824H/825H/825HV/
826WH/826WHV, G5650W/C450WH/G5950/C520XH/G5900/C520XB/700KG/G5600/C450XB/600KG/G5800/C520XE
/G5500/C450XE/G5750WU/G5450WU, 455Wi/465i/465T, 93/95/96W/900/910W/905/915W/925),
D283/D293/D6150/D6155W/D6250, 1860/1870/1880/1840W/1850W, W01/S02/X02/W02/S11/X11/S12/X12/W12/X14
420/425W/425We/425Wi/430/430i/435W/435We/435Wi/CS500WN/CS500XN/CS510XN/CS520WN,
470/475W/475Wi/475Wi+/475Wie/480/480e/480i/480T/485W/485We/485Wi/485Wi+/485Wie/485WT/CU600W/CU600
Wi/CU600X/CU610W/CU610Wi/CU610X/CU610Xi,B1500/B1575WU/B1585W/Z10000/Z10005/Z8150
Z8350W/Z8355W/Z8450WU/Z8455WU/Z9750WU/Z9800/Z9805W/Z9810/Z9850W/Z9900)
・ Select RS-232C at Advanced Setting of the Menu.
・ Communication condition
Baud rate : 9600bps
Data length : 8 bits
Parity : No
Stop bit : 1 bit
Flow control : No
・ Connector : D-Sub 9pin
・ Projector input : Control(RS-232C)
To Next Page
Loading...
Need help?
General
