2 Using the Control Panel
Using the Control Panel
The control panel makes it easy to use many of your product’s features.
ET-2700
You may see the following lights turn on or flash on the control panel:
Note: If all lights flash simultaneously, open the scanner unit and make sure there is no
paper or packing materials inside the printer. Turn the power off and on again. If the
error continues to occur, contact Epson for support.
See the online User’s Guide for a complete list of light patterns.
The top light turns solid green when the product is connected to a wireless
network or flashes when the product is communicating with the wireless
network. The bottom light turns solid orange when the product’s Wi-Fi
Direct network is active.
The lights flash alternately or simultaneously while initializing, trying to
connect to a network, or if there is a problem with the product’s wireless
connection.
Indicates the status of the initial ink charge. If it turns solid orange, ink
charging may not be complete. See the Start Here poster to complete initial
ink charging.
Turns on or flashes when paper is out or a paper jam occurs.
Turn on
or off
Print a network
status sheet
Stop current
operation
Clear a network error. Press for 3 seconds to
connect to a network using WPS.
Start a monochrome or color copy. Press
both simultaneously to scan to a computer.
To Next Page
Loading...
