Epson ET-2820 Series

c
Important:
❏ Do not load more than the maximum number of sheets
specied
for the paper. For plain paper, do not load
above the line just under the
d symbol inside the edge guide.
❏ Load paper short edge rst. However, when you have set the long edge as the width of the user dened size,
load paper long edge
rst.
4.
Slide the edge guides to the edges of the paper.
ET-2820 Series/L3260 Series: Close the feeder guard aer sliding the edge guides.
c
Important:
ET-2820 Series/L3260 Series: Do not place objects on the feeder guard. Doing so may prevent paper from
feeding.
5.
Select the paper size and paper type.
6.
Slide out the output tray.
Note:
Return the remaining paper to its package. If you leave it in the printer, the paper may curl or the print quality may
decline.
Related Information
& “Paper Size and Type Settings” on page 27
Loading Paper > Loading Paper in the Rear Paper Feeder
30