116
Caution: Wear disposable gloves while refilling the ink tanks to avoid staining your hands. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains. If ink gets on your clothes or
belongings, it may not come off.
1. Place a sheet of paper or plastic under the ink tank unit, as ink may splatter.
2. Turn on your product.
3. If you see a message on the LCD screen telling you to reset the ink levels, note the ink tanks that
need refilling and press the OK button. Otherwise, select Setup > Maintenance > Reset Ink Levels
and press the Start Color button.
4. Open the ink tank unit cover, then remove the ink tank cap and place it in the holder shown here.
Note: Make sure the color of the ink tank label matches the ink color you want to refill, and only
remove the cap from that ink tank. Be careful not to spill any ink.
To Next Page
Loading...
