Epson ET-3600 - Resetting Control Panel Defaults

147
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic: Solving Problems
Related concepts
Print Head Cleaning
Print Head Alignment
Uninstall Your Product Software
Related references
Where to Get Help
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the up or down arrow button, select Setup, and press the OK button.
2. Press the down arrow button, select Restore Default Settings, and press the OK button.
You see this screen:
3. Press the up or down arrow button to select one of these options and press the OK button.
• Network Settings: Restores all of the default network settings.
• Clear All Data and Settings: Restores all of the default settings and resets contact and network
data on the control panel.
You see a confirmation screen.
4. Press the up arrow button to reset the selected settings. Press the down arrow button if you want to
cancel the operation.