EasyManua.ls Logo

Epson ET-3600 - Page 154

Epson ET-3600
202 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
154
Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and
5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band,
give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home
Network 5 GHz. See your router documentation or contact your internet service provider for
instructions.
If you are scanning a large original at a high resolution, a network communication error may occur. Try
scanning again at a lower resolution.
If network communication was interrupted while starting Epson Scan 2, exit Epson Scan 2, wait a few
seconds, and restart it. If Epson Scan 2 cannot restart, turn off your product, turn it back on, and try
restarting Epson Scan 2 again.
Check the scanner setting and reset the connection if necessary using Epson Scan 2 Utility:
Windows 10: Click , select All apps, select EPSON, and select Epson Scan 2 Utility. Make sure
your product is selected. If necessary, select the Other tab and click Reset.
Windows 8.x: Navigate to the Apps screen, select EPSON, and select Epson Scan 2 Utility. Make
sure your product is selected. If necessary, select the Other tab and click Reset.
Windows (other versions): Click or Start > All Programs or Programs > EPSON > Epson Scan
2 > Epson Scan 2 Utility. Make sure your product is selected. If necessary, select the Other tab and
click Reset.
OS X: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility. Make
sure your product is selected. If necessary, select the Other tab and click Reset.
You may need to disable the firewall and any anti-virus software on your wireless router or access
point.
Note: With OS X, in addition to scanning with Image Capture, you can download and install Epson Scan
2 scanning software. Epson Scan 2 provides additional image adjustment and photo correction features
for enhancing scanned images, and provides an interface for TWAIN-compliant OCR scanning software.
To download Epson Scan 2, visit Epson's driver download site (U.S. downloads or Canadian
downloads).
Parent topic: Solving Network Problems
Related tasks
Starting a Scan Using the Product Control Panel
Starting a Scan Using the Epson Scan 2 Icon

Table of Contents

Other manuals for Epson ET-3600

Related product manuals