35
4. Enter your wireless password using the numeric keypad.
Note: The network name and password are case sensitive. Be sure to correctly enter uppercase and
lowercase letters, and numeric or special characters.
• To enter uppercase or lowercase letters, numbers, or symbols, press the corresponding button on
the numeric keypad to scroll through characters.
• To move to the next character, press the right arrow button.
• To delete the previous character, press the left arrow button.
5. Press the OK button when you finish entering your password.
6. Confirm the displayed network settings and press the OK button to save them.
Note: If you need to change a setting, press the back button.
7. If you want to print a network setup report, press one of the Start buttons. (Otherwise, press the
OK button.)
If the network connection is successful, the Wi-Fi icon appears in the upper-right corner of the
LCD screen.
Note: If the Wi-Fi icon is not displayed on the LCD screen, you may have selected the wrong
network name or entered the password incorrectly. Repeat these steps to try again.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related tasks
Entering Characters on the LCD Screen
To Next Page
Loading...
